MORNINGSTAR TRISTAR 60 AMP VOLT 12/24/48 PWM SOLAR CHARGE CONTROLLER
Manufacturer Part Number: TS-60
Morningstar’s TriStar Solar Charge Controller is a three-function controller that provides reliable solar battery charging, load control, or diversion regulation. The controller operates in one of these modes at a time and two or more controllers may be used to provide multiple functions.
The TriStar uses advanced technology and automated production to provide exciting new features at a competitive cost. The optional TriStar meter is the most sophisticated and informative controller meter on the market. The solar charge controller is UL listed and is designed for both solar home systems and professional applications.
*Local pickup & Shipping are available. Please contact us for the shipping rate.
SPECIFICATIONS
Electrical
| Rated solar, load or diversion current: | 60 Amps | |
| System Voltage | 12-48V | |
| Accuracy | 12/24V: 0.1% +/-50mV 48V: 0.1% +/-100mV | |
| Min. voltage to operate | 9V | |
| Max. solar voltage (Voc) | 125V | |
| Self-consumption: | Controller > 20mA Meter 7.5mA | |
Environmental
- Operating ambient temperature (Controller): –40°C to +60°C
- Operating ambient temperature (Meter): –40°C to +60°C
- Storage temperature: –55°C to +85°C
- Humidity: 100% (non-condensing)
- Tropicalization: Conformal coating on both sides of all printed circuit boards
Electronic Protections
- Reverse polarity protection (any combination)
- Short-circuit protection
- Overcurrent protection
- Lightning and transient surge protection using 4500W transient voltage suppressors
- High temperature protection via automatic current reduction or complete shut down
- Prevents reverse current from battery at night
TriStar Options:
Digital Meters
Two digital meters can be added to the TriStar at any time during or after installation. One version is mounted on the controller (TS-M), the other is suitable for remote locations (TS-RM):
- TriStar Meter (TS-M) — 2 x 16 display mounts to controller and provides system and controller information, data logging, bar graphs and choice of 5 languages
- TriStar Remote Meter(TS-RM) — Includes 30 meters of cable for mounting meter away from the controller
The display is a 2×16 LCD meter with backlighting. Four pushbuttons are used to scroll through the displays and to execute manual functions. There are a series of display screens that provide information such as:
- operating information and data
- operating bar charts (voltage and current)
- alarms and faults
- diagnostics
- settings
In addition, there are various manual functions built into the meter. For example, the meter can be used to reset Ah data or start/stop equalizations. One of 5 languages can be selected for the meter.
Remote Temperature Sensor
Provides temperature compensated charging by measuring temperature at the battery (10 meter cable)
If the temperature of the system battery varies more than 5°C (9°F) during the year, temperature compensated charging should be considered. Because the battery’s chemical reactions change with temperature, it can be important to adjust charging to account for the temperature effects. The RTS will measure the battery temperature, and the TriStar uses this input to adjust the charging as required.
The battery charging will be corrected for temperature as follows:
| 12 V battery | 0.030 Volts per °C (–0.017V per °F) |
| 24 V battery | 0.060 Volts per °C (–0.033V per °F) |
| 48 V battery | 0.120 Volts per °C (–0.067V per °F) |
The RTS should be used only for battery charging and diversion control. Do not use the RTS for load control. The charging parameters that are adjusted for temperature include:
- PWM regulation
- Equalization
- Float
- High Voltage Disconnect
Mechanical
Dimensions:
| Height: | 26.0cm/10.3 inch |
| Width: | 12.7cm/5.0 inch |
| Depth: | 7.1cm/2.8 inch |
| Weight: | 1.6 kg/3.5 lb |
| Largest Wire: | 35mm2/2 AWG |
| Conduit Knockouts: | Eccentric 2.5/3.2 cm (1.0/1.25 inch) |
| Enclosure: | Type 1, indoor rated |
Reviews
There are no reviews yet.