Magnum Energy PT-100 100A MPPT Solar Charge Controller

$1,410.00

Part Number: PT-100
Availability: In Stock

Magnum Energy PT-100 100A MPPT Solar Charge Controller

Magnum Energy PT-100 100A MPPT Solar Charge Controller

The PT-100 is a Maximum Power Point Tracker (MPPT) solar charge controller designed to harvest the maximum available energy from the PV array and deliver it to the batteries.  The PT-100’s MPPT algorithm finds the maximum power point of the array and operates at this point while regulating the output current and battery voltage to fully charge the battery.

Solar Charge Controller FEATURE:
  • Maximum Power Point Tracking (MPPT) technology for increased PV power output efficiency
  • Multi-state Charging for maximizes system performance and improves battery life
  • Optimal Battery Charging using an included external temperature sensor for optimum battery charging, even during extreme temperature changes
  • Compatible with 12, 24, or 48V battery systems with automatic detection of system voltage
  • GFDI: Integrated PV Ground-Fault Detection and Interruption/Indication, with pre-fault leakage/diagnostic metering
  • AFCI: An integrated PV Arc-Fault Circuit Interrupter detects, indicates, and extinguishes series arcs. The AFCI is designed to meet the new National Electric Code (NEC) Article 690.11 requirements
  • Extensive Electronic Protection: Over-temperature protection, power derating when temperature is high, PV short circuit and high PV input shutdown, output overcurrent protection and night-time back-feed (reverse current) protection
  • Supports large PV arrays – a single controller supports a large PV array up to 6600W
  • High Efficiency – provides higher than 99% conversion efficiency and uses less than two watts of power in nighttime mode
  • Multiple LED indicators and large digital LED screen on front panel for easy-to-read system information
  • Convenient Installation – Run all of the wiring to the unique, remain-in-place wiring box with ease prior to installing the full PT-100 unit
  • On-site Updates – The PT-100’s software can be updated on site
  • Easy MP and MMP integration – The PT-100 is designed to work with a Magnum Panel (MP) or Mini-Magnum Panel (MMP). It provides room and access to PV and battery disconnect breakers
  • Optional ME-ARC50 Remote works with internal data-logging functionality that keeps energy harvest information and battery Ah/Wh data for up to 255 days. It is the only remote, currently, that works with the PT-100 menus.

SPECIFICATIONS

Maximum PV Input Voltage        200 VDC + battery voltage or 240 VDC whichever is lower
Maximum PV Operating Voltage    187 VDC
Nominal Battery Voltage Range    12, 24, or 48 VDC
Battery Charger Output Voltage    10 to 66 VDC
Maximum Output Power    6600 Watts
Peak (and full power) Efficiency>99% (98% typical)
Charger Regulation Method     Automatic three-stage (Bulk, Absorption, Float) Charge with Manual Equalization
Overcurrent Protection     With Two Overlapping Circuits
Operating Temperature    -28°C to +60°C (-4°F to 140°F)
Operating Humidity     0 – 95% RH Non-Condensing
Enclosure Type    Indoor, Ventilated, with Removable Powder-Coated Conduit Box
Warranty    Five Years Parts and Labor
Weight    12.5 lb (5.7 kg)
Dimensions    8.5″ x 15.5″ x 4.0″ (21.6 cm x 39.4 cm x 10.2 cm)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Shopping Cart